Table of Contents
Advertisement
© Copyright Agilent Tech-
nologies 2000
All Rights Reserved.
Reproduction, adaptation,
or translation without
prior written permission is
prohibited, except as
allowed under copyright
laws.
Agilent
Part No. 86121-90001
Printed in USA
January 2000
Agilent Technologies
Lightwave Division
1400 Fountaingrove
Parkway
Santa Rosa, CA
95403-1799, USA
(707) 577-1400
Notice.
The information con-
tained in this document is
subject to change without
notice. Companies,
names, and data used in
examples herein are ficti-
tious unless otherwise
noted. Agilent Technolo-
gies makes no warranty of
any kind with regard to
this material, including but
not limited to, the implied
warranties of merchant-
ability and fitness for a
particular purpose. Agilent
Technologies shall not be
liable for errors contained
herein or for incidental or
consequential damages in
connection with the fur-
nishing, performance, or
use of this material.
Restricted Rights Legend.
Use, duplication, or disclo-
sure by the U.S. Govern-
ment is subject to
restrictions as set forth in
subparagraph (c) (1) (ii) of
the Rights in Technical
Data and Computer Soft-
ware clause at DFARS
252.227-7013 for DOD
agencies, and subpara-
graphs (c) (1) and (c) (2) of
the Commercial Computer
Software Restricted
Rights clause at FAR
52.227-19 for other agen-
cies.
Warranty.
This Agilent Technologies
instrument product is war-
ranted against defects in
material and workmanship
for a period of one year
from date of shipment.
During the warranty
period, Agilent Technolo-
gies Company will, at its
option, either repair or
replace products which
prove to be defective. For
warranty service or repair,
this product must be
returned to a service facil-
ity designated by Agilent
Technologies. Buyer shall
prepay shipping charges
to Agilent Technologies
and Agilent Technologies
shall pay shipping charges
to return the product to
Buyer. However, Buyer
shall pay all shipping
charges, duties, and taxes
for products returned to
Agilent Technologies from
another country.
Agilent Technologies war-
rants that its software and
firmware designated by
Agilent Technologies for
use with an instrument
will execute its program-
ming instructions when
properly installed on that
instrument. Agilent Tech-
nologies does not warrant
that the operation of the
instrument, or software,
or firmware will be unin-
terrupted or error-free.
Limitation of Warranty.
The foregoing warranty
shall not apply to defects
resulting from improper or
inadequate maintenance
by Buyer, Buyer-supplied
software or interfacing,
unauthorized modification
or misuse, operation out-
side of the environmental
specifications for the
product, or improper site
preparation or mainte-
nance.
No other warranty is
expressed or implied. Agi-
lent Technologies specifi-
cally disclaims the implied
warranties of merchant-
ability and fitness for a
particular purpose.
Exclusive Remedies.
The remedies provided
herein are buyer's sole
and exclusive remedies.
Agilent Technologies shall
not be liable for any
direct, indirect, special,
incidental, or consequen-
tial damages, whether
based on contract, tort, or
any other legal theory.
Safety Symbols.
CAUTION
The caution sign denotes
a hazard. It calls attention
to a procedure which, if
not correctly performed or
adhered to, could result in
damage to or destruction
of the product. Do not pro-
ceed beyond a caution
sign until the indicated
conditions are fully under-
stood and met.
WARNING
The warning sign denotes
a hazard. It calls attention
to a procedure which, if
not correctly performed or
adhered to, could result in
injury or loss of life. Do
not proceed beyond a
warning sign until the
indicated conditions are
fully understood and met.
The instruction
manual symbol.
The product is
marked with this
warning symbol
when it is neces-
sary for the user
to refer to the
instructions in the
manual.
The laser radia-
tion symbol. This
warning symbol is
marked on prod-
ucts which have a
laser output.
The AC symbol is
used to indicate
the required
nature of the line
module input
power.
| The ON sym-
bols are used to
mark the positions
of the instrument
power line switch.
❍ The OFF sym-
bols are used to
mark the positions
of the instrument
power line switch.
The CE mark is a
registered trade-
mark of the Euro-
pean Community.
The CSA mark is a
registered trade-
mark of the Cana-
dian Standards
Association.
The C-Tick mark is
a registered trade-
mark of the Aus-
tralian Spectrum
Management
Agency.
This text denotes
ISM1-A
the instrument is
an Industrial Sci-
entific and Medi-
cal Group 1 Class
A product.
Advertisement
Table of Contents
