Table of Contents
Advertisement
Entering Pipe Lining
Data
Programming Site Data
To access the Lining option:
1. From the Pipe submenu, scroll to the Lining option, and press
[ENT].
2. Two options appear, Material and Thickness. Be sure Material is
highlighted, and press [ENT].
3. Two other options now appear, Preprogrammed and Other. Scroll
to the desired option, and press [ENT].
4. The menu now varies with your choice in Step 3.
•
For preprogrammed linings, the screen shows a list of Lining
Materials, listed in Table 2-2 below. Scroll to the appropriate
material. If the pipe has no lining, select "None." Press [ENT] to
confirm the choice.
•
For other materials, the next screen asks for the lining Soundspeed.
Press [ENT] to open the soundspeed window. Use the arrow keys
to enter the known soundspeed, and press [ENT].
Table 2-2: Preprogrammed Lining Materials
Lining Material Options
Note: If your pipe lining is not on the drop-down list, consult GE
Panametrics for further information.
What's Next?
You have finished entering data in the Pipe submenu. Do one of the
following:
•
To program in other options, press [ESC] until you return to the
PROG menu.
•
To program in other menus, refer to Appendix A, Menu Maps, to
navigate to the desired menu.
•
To leave the User Program, press [ESC] until the display screen
reappears.
None
Tar/Epoxy
Glass (Pyrex)
Asbestos Cement
Mortar
Rubber
Teflon
March 2004
2-11
Advertisement
Table of Contents
