Table 2-8 Output Swr Result - Agilent Technologies E4416A Service Manual

2 Performance Tests
One of the roots of this equation will be non- physical while the other gives
a value for
•
27 Calculate the value of the output SWR using Equation 2- 13 and record the
value:
Equation 2-13:
SWR
• Output SWR ___________
28 Verify that the output SWR is not greater than the maximum value shown in
the following table:
The
N O TE
network analyzer. For clarification, above
measured at 100 Ω.

Table 2-8 Output SWR Result

* For instruments with the 50 MHz 1 mW output (power ref) connector mounted on the front panel.
† For instruments with the 50 MHz 1 mW output (power ref) connector mounted on the rear panel.
This applies to models E4416A and E4417A with Option 003.
56
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Γ
.
s
Γ
___________
s
( Γ )
1 +
s
= ---------------------- -
( Γ )
1 –
s
Γ Γ
and values are measuredfor the thermistor mount (478A) using the
1 2
Max
*
1.06
†
1.08
Γ
is measured at 200 ohm while
1
Actual Result
__________________
__________________
E4416A/E4417A Power Meters Service Guide
Γ
is
2