5
Replaceable Parts
After replacing a front panel assembly, the display brightness and contrast must be
N O TE
adjusted. Refer to
information.
Replacing the Front Panel Power Sensor Cable Assemblies
1 Remove the front panel from the power meter. (Refer to
Front Panel Assembly"
2 Replace the power sensor cable assembly(s) using the replacement kit.
Front panel sensor retaining
clip recess
106
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
screw
Chapter
3, "Display Brightness and Contrast Adjustment" for further
on page 105 for details on removing the front panel).
E4416A/E4417A Power Meters Service Guide
tab
"Removing the A3