Test Setup; Instrument Accuracy (Average Path) Test Setup; Figure 2-4 Instrument Accuracy (Average Path) Test Setup - Agilent Technologies E4416A Service Manual

Test Setup

CHANNEL A

Figure 2-4 Instrument Accuracy (Average Path) Test Setup

Procedure
Use the following procedure to perform the instrument accuracy (average
path) test:
The procedure details the key presses required on the Agilent E4416A. For the Agilent
N O TE
E4417A the equivalent key presses should be performed on both channels.
1 Connect the equipment as shown in
2 Switch the power meter on.
3 Preset the instrument:
Press
4 Set the display units to watts:
Press
5 Set the display resolution:
Press
E4416A/E4417A Power Meters Service Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Power Meter
Power sensor cable
Preset
then Confirm .
Local
Meas
, , .
Units W
Display
Meas
,
then press
Resolution
Display
Performance Tests
Range Calibrator
Figure 2- 4.
until is selected.
4
2
29