Measurement Characteristics - Agilent Technologies E4416A Service Manual

1 Specifications

Measurement Characteristics

• Measurements:
• Averaging:
• Measurement Speed
(GPIB):
Sensor Type
E-Series E9320 peak and average
sensors
E-Series E4410 and E-Series E9300 average power sensors
8480 Series power sensors
N8480 Series power sensors
1 Fast speed not available for 8480 Series and N8480 Series sensors.
2 Maximum measurement speed is obtained by using binary output in free run trigger mode.
3 For E-Series E9320 sensors maximum speed is achieved using binary output in free run acquisition.
8
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Average Power.
Peak Power.
Peak- to- Average ratio. Measurements between
two time offsets (time gating).
Averaging over 1 to 1024 readings is available for
reducing noise.
Over the GPIB, three measurement modes are
available - Normal, X2 and Fast. The typical
maximum speed for each mode is shown in the
following table:
Average-only mode
3
Normal mode
Measurement Speed
(readings per second)
1
Normal x
20 40
20 40
20 40
20 40
20 40
E4416A/E4417A Power Meters Service Guide
1,2
Fast
400
1000
400
N.A.
N.A.