Siemens SINAMICS DCM Operating Instructions Manual page 356

Descriptions of functions
10.2 PROFIBUS
Procedure
1. Select a slave (e.g. SINAMICS DCM) and use its properties to configure the telegram for
2. In the "Configuration" tab of the drive unit, select e.g. the standard telegram 1 for the
3. Then go to the detail view.
354
the connected drive object.
associated drive in the telegram selection.
Figure 10-7 Telegram selection for drive object
Slots 4/5 contain the actual value/setpoint for the drive object.
The slots 7/8 are the telegram portions for the actual value/setpoint of the CU.
Operating Instructions, 1.2012, C98130-A7066-A1-05-7619
SINAMICS DCM DC Converter