Siemens SINAMICS DCM Operating Instructions Manual page 30

Type spectrum, ordering information
2.4 Ordering information for options and accessories
Item
STARTER commissioning tool
Drive Control Chart (DCC) for SINAMICS
Drive Control Chart (DCC) for SINAMICS and SIMOTION
Please contact your local Siemens office.
1)
Refer to the section titled "Connecting" as well as the catalogs and reference sources specified in this section.
2)
The installation instructions are provided on the SINAMICS DCM Documentation DVD under "Accessories"
3)
see Chapter "Fuses" as well as the catalogs and reference sources specified in this chapter.
4)
Table 2- 7 Order numbers for the Advanced Operator Panel AOP30
Item
Advanced Operator Panel AOP30
RS485 connecting cable for connecting the AOP30 to one CUD; 3 m
RS485 connecting cable for connecting the AOP30 to two CUDs; 3 m
Additional cable lengths can be ordered as option.
When ordering the RS485 cable with option, the suffix "-Z" must be attached to the Order No. followed by the order code
for the required option.
Ordering example for a 35 m long cable:
Order number: 6RY1807-0AP00-Z, order code: K35
Cable length
5 m
10 m
15 m
20 m
25 m
30 m
35 m
40 m
45 m
50 m
28
6SL3072-0AA00-0AG0
6AU1810-1HA20-1XA0
6AU1810-1JA20-1XA0
Order number
6RY1807-0AP10
Operating Instructions, 1.2012, C98130-A7066-A1-05-7619
Order number
6SL3055-0AA00-4CA4
6RY1807-0AP00
Order code
K05
K10
K15
K20
K25
K30
K35
K40
K45
K50
SINAMICS DCM DC Converter