Siemens SINAMICS DCM Operating Instructions Manual page 370

Descriptions of functions
10.3 PROFINET IO
In the dialog screen that appears next, enter a freely selectable unit name, the IP address,
and subnet screen.
The subnet screens must match before STARTER can be run.
Figure 10-23 STARTER - Edit Ethernet Node
After selecting the "Assign name" button, the following confirmation will appear if the
assignment was successful: In certain cases, a RAM to ROM is executed in the drive and
you must wait until it has been completed.
Figure 10-24 STARTER - Successful assignment of the unit name
After selecting the "Assign IP configuration" button, the following confirmation will appear if
the assignment was successful: In certain cases, a RAM to ROM is executed in the drive
and you must wait until it has been completed.
368
Operating Instructions, 1.2012, C98130-A7066-A1-05-7619
SINAMICS DCM DC Converter