Connector Coding - Siemens SINAMICS DCM Operating Instructions Manual

Dc converter

Hide thumbs Also See for SINAMICS DCM:

Table of Contents

Connector coding

To ensure that identical connectors are assigned correctly on the TM31, the connectors are

coded as shown in the diagram below.

The bending radii of the cables must be observed (see MOTION-CONNECT description).

SINAMICS DCM DC Converter

Operating Instructions, 1.2012, C98130-A7066-A1-05-7619

TM31 connector coding

Additional system components

7.4 Terminal Module TM31