Siemens SINAMICS DCM Operating Instructions Manual page 84

Transportation, unpacking, installation
5.2 Installation


Figure 5-13

CAUTION: Do not clamp the BOP cable
Figure 5-14
82
Mount the CUD and push it into the connectors for the left-hand CUD.
Secure the CUD using 4 screws (screw and washer assembly, M3×6), tightening torque 1 Nm
Installing a second CUD (2)
Lock the BOP support again.
Installing a second CUD (3)
Operating Instructions, 1.2012, C98130-A7066-A1-05-7619
SINAMICS DCM DC Converter