Controlling Via The Aop30 Operator Panel - Siemens SINAMICS DCM Operating Instructions Manual

Operation

9.3 Controlling via the AOP30 operator panel

9.3 Controlling via the AOP30 operator panel
The OFF switch on the AOP30 operator panel does not have an EMERGENCY OFF
function.
In order to avoid dangerous incorrect operator actions, the EMERGENCY OFF pushbutton
must be installed in a plant or system at an adequate distance from the AOP30.
Note
To operate the AOP30, p2030=3 must be set.
An operator panel is located in the cabinet door of the cabinet unit for operating, monitoring,
and commissioning tasks. It has the following features:
● Graphical, backlit LCD for plain-text display and a "bar display" of process variables
● LEDs for displaying the operating states
● Help function describing the causes of and remedies for faults and alarms
● Keypad for controlling a drive under normal operating conditions
● LOCAL/REMOTE switchover for selecting the control terminal (master control assigned to
● Numeric keypad for entering setpoints or parameter values
● Function keys for prompted navigation through the menus
● Two-stage safety concept to protect against accidental or unauthorized changes to
settings
● IP54 degree of protection (as installed)
314
WARNING
operator panel or customer terminal block/PROFIBUS)
Operating Instructions, 1.2012, C98130-A7066-A1-05-7619
SINAMICS DCM DC Converter