Installing, Updating, And Removing Portvision Plus; Portvision Plus Installation; Updating Portvision Plus; Removing Portvision Plus - Comtrol DeviceMaster AIR User Manual

Installing, Updating, and Removing PortVision Plus

Installing, Updating, and Removing PortVision Plus
PortVision Plus
Installation
Updating PortVision
Plus
Removing
PortVision Plus
28 - DeviceMaster AIR User Guide: 2000365 Rev. C
You can install PortVision Plus from the Software and Documentation CD that
came with your product or download the latest version
Documentation on Page 8).
Note: PortVision Plus requires that you connect the DeviceMaster AIR to the same
network segment as the Microsoft system during the configuration process.
Use this procedure to install PortVision Plus from a Software and Documentation
CD or download the latest from the internet.
1. Install from CD, use the menu system on the CD to start the installation or
browse to the appropriate CD drive and locate the \Dev_Mstr\PortVision_Plus
directory.
2. Execute the PVPlus.MSI file and follow the installation wizard.
3. Optionally, launch PortVision Plus from the last installation screen and allow
PortVision Plus to create shortcuts for the COM port utilities (Test Terminal
and Port Monitor).
4. Select the Scan button so that PortVision Plus locates the DeviceMaster AIR
units on the network.
See Using PortVision Plus to Configure the Network Settings
program the DeviceMaster AIR network settings. For additional information
about PortVision Plus, see the help system.
Use the following procedure to update PortVision Plus.
1. Download the latest version of PortVision Plus
Documentation on Page 6).
2. Execute the PVPlus.MSI file and follow the installation wizard.
PortVision Plus updates the application automatically using the installation
wizard.
You can remove PortVision Plus by executing the PVPlus.msi installation file or by
using the Add/Remove control panel:
1. Open the Add or Remove control panel.
2. Highlight PortVision Plus and select the Remove button.
To fully remove PortVision Plus from your system, also remove the \Program
Files\Comtrol\PortVision_Plus directory.
(Locating Software and
on Page 29 to
(Locating Software and
Network Configuration for the Serial Portion