Table of Contents
Advertisement
52
C
3: C
HAPTER
ONFIGURING THE
Upgrading the
Bridge Firmware
Using FTP (default)
Using TFTP
B
RIDGE
If the Bridge was using an IP address setting other than the default,
restoring the factory defaults will change the IP address. If you want to
continue configuring the Bridge, do the following:
1 Close your browser.
2 Return to the 3Com Wireless Infrastructure Device Manager and click Refresh.
3 Select the device and click Configure to start a new configuration session.
You can download firmware updates or updates to the Configuration
Management System from the 3Com Web site and install these on the
Bridge.
Options for upgrading the system include using a Trivial File Transfer
Protocol (TFTP) server or File Transfer Protocol (FTP) server. The Bridge acts
as a TFTP or FTP client to receive the download. Alternatively, you an use
the HTTP option and upload the firmware from a downloaded file placed
on your computer.
The general instructions for installing the upgrade using FTP are:
1 Under Tools, click Upgrade System.
2 Select FTP.
3 Enter the IP address of the FTP server where the upgrade files are located.
4 Enter the user name, password, path and filename in the appropriate
fields.
5 Click Upgrade.
The general instructions for installing the upgrade using TFTP are:
1 Under Tools, click Upgrade System.
2 Select TFTP.
3 Enter the file name for the firmware.
4 Enter the IP address of the TFTP server where the upgrade files are located.
5 Click Upgrade.
Advertisement
Table of Contents
