Table of Contents
Advertisement
3-16
C
3: C
HAPTER
ONFIGURATION
Configuring an
AccessBuilder
Using Guided
Configuration
Remote Client
Configuration
AppleTalk Clients
U
T
SING
RANSCEND
Guided Configuration enables a more comprehensive configuration of
the AccessBuilder than does the Basic Configuration.
When an AccessBuilder server is displayed in the external view window,
choose Guided Configuration from the System menu. Each of the
following dialog boxes are then displayed, in sequence:
System
Protocols
Asynchronous Ports
Remote Users
To perform a Guided Configuration, follow these steps (refer to the
on-line help as necessary):
1 Double-click the new server's name/address in the list of servers
displayed in the All Servers List View. The single-server external view
appears for the server you selected.
2 From the Configuration menu, choose Guided Configuration. The
Guided Configuration procedure displays each required dialog box in
sequence.
3 Complete each dialog box (choose the Help button in each dialog box
for detailed instructions).
When you have finished filling out the last dialog box, the
AccessBuilder server is ready to use for individual-to-LAN operation. Be
sure your remote clients are configured to connect to the AccessBuilder.
Also note that the AccessBuilder must be reboot in order for the new
values to take effect.
Once you have finished configuration of the AccessBuilder server, you
will want to ensure your remote clients have successfully installed their
remote access client software. Refer to the AccessBuilder server
Release Notes for current information regarding the various client type
supported.
The AccessBuilder supports AppleTalk clients using the Apple Remote
Access (ARA) software. Refer to the Apple documentation provided
with the ARA software for installation details.
A
B
M
CCESS
UILDER
ANAGER
(TABM)
Advertisement
Table of Contents
