Step 4: Connect The Appliance To The Network - 3Com AirProtect Enterprise Engine 6100 Quick Setup Manual

Hide thumbs Also See for AirProtect Enterprise Engine 6100:

Step 4: Connect the Appliance to the Network

Connect the appliance to the network using the network interface cable as shown in the figure below.

Warning! The default IP address of the appliance is 192.168.1.246. Please ensure that no other device on your network uses the same IP

address as the appliance. Connect the network interface port on the appliance to the desired subnet using the network interface cable

provided to you. Do not connect the High Availability (HA) Interface port to the subnet.

Step 5: Access the 3Com AirProtect Enterprise Server

A. Connect your computer to the same subnet where the Server is connected.

Change your computer IP address to 192.168.1.XXX. For example, 192.168.1.244.

C. Access the 3Com AirProtect Enterprise Server using SSH as shown in the figure below.

D. Login using the Username: config and Password: password.

3Com® AirProtect Enterprise Engine 6100 Quick Setup Guide