Table of Contents
Advertisement
Comms
talk osc/routing
The talk / osc routing, or 'internal talk groups' section, contains eight talk group
switches used for selecting the destination of the talk and OSC internal signals. Each
switch has an integral LED that illuminates to show when it is on. Talk groups are
configured in the GUI menu; see "Talk Groups screen" on page 136.
3
7
2
1
MTX (matrix) switch routes the talk/OSC internal
signal to all matrices.
2
Four user-assignable talk group buttons (1 to 4)
are programmed by giving a long press (more than
one second) followed by selection of the appropriate
talk switch(es), situated below the meters on the mix
fast strips (see page 70) or output fast strips (see
page 102).
3
ALL switch routes the talk/OSC internal signal to
all outputs.
XL8 Control Surface
Operator Manual
4
5
1
3
4
INP (input) switch routes the talk/OSC internal
signal to the input section.
5
AUX switch routes the talk/OSC internal signal to
all auxes.
6
Four blank grey switches (GUI only) for quick
access to the "Talk Groups screen" on page 136.
7
Four fixed bus talk group switches.
109
4
5
1
7
2
6
Advertisement
Table of Contents
