Table of Contents
Advertisement
Auxes
Auxes
The diagram right abstractly
shows the different groups of
controls on each aux
channel. It does not
necessarily show the linear
order of processing of the
signal in that channel, as this
is variable according to a
variety of options.
In this section we will look at
each of these groups of
controls.
The diagram below shows
the aux-related control
surface areas on the mix
bay.
XL8 Control Centre
Operator Manual
Aux channel
signal path
Order can be
swapped by
clicking C/O
(GUI-only), see
page 85
Configuration controls, see
page 74
Direct input, see page 75
Dynamics, see page 76
Insert, see page 78
6-band parametric EQ or
assignable graphic EQ, see
page 79
Matrix outputs, see page 80
Fader and master controls,
see page 82
These two buttons (on output
channel strip of the mix bay)
page the output section to
address the auxes. This diagram
shows the controls that are
operational when the aux sends
are paged to the output section.
73
Advertisement
Table of Contents
