Table of Contents
Advertisement
Setting up a mix
To program a mix preset
Programming mix presets is a cumulative process, that is, you can continually add
mixes to the store without affecting the ones already there. Once a mix preset is
programmed, it will be displayed whenever the preset button in the mix select section
of the input channel strip is pressed.
1
In an input bay's channel strip, select the mix you require
(that is, aux or matrix) to the mixes section of the input
fast strips. Do this by using any combination of the AUX,
MTX, scroll by 8 and scroll pair buttons.
2
Press and hold down the set upper button in the mix
preset section. This allows you to select all of the odd
numbered mixes (top number) shown in the mixes
section of the input fast strips.
3
While holding down the set upper button, press (store)
at every input channel you wish to select to the preset.
4
While still holding down the set upper button, repeat
steps 1 and 3 for all other odd numbered mixes you with
to select to the preset.
5
Release set upper button. Presets are stored.
XL8 Control Centre
Operator Manual
7
1a
1c
2
6
8
1b
6
Repeat steps 1 to 5, inclusive, to add all even numbered
mixes, but press set lower instead of set upper.
7
When you release the set lower button, the even
numbered mixes are added to the odd numbered ones
already in the preset store. All programmed presets will
be selected to the input channels. To deselect them from
the input channels, press one of the AUX or MTX buttons,
for example, the 1-8 AUX button; this action does not
affect the stored presets.
8
Press preset to view programmed presets.
187
3
Advertisement
Table of Contents
