Output Channel Processing; Effects Processing And Geqs - Midas XL8 Operator's Manual

Output channel processing

Output channel processing
Each of the 16 matrix buses has:
• Six-band PEQ.
• Optional 31-band GEQ (replaces PEQ).
• Five-mode frequency-conscious compressor with soft clip limiter and external side
chain.
• Insert point.
• Direct input.
Each of the three master output buses has:
• Six-band PEQ.
• Optional 31-band GEQ (replaces PEQ).
• Five-mode frequency-conscious compressor with soft clip limiter and external side
chain.
• Insert point.
• Direct input.

Effects processing and GEQs

The XL8 contains 16 mono Klark Teknik (KT) GEQs and 16 effects processors as
standard.
The 16 effects processors can be freely chosen from:
• KT DN780 reverb.
• Stereo delay.
• Stereo flanger.
• Stereo phaser.
The 16 mono KT GEQs can be patched into any output. There are many patching
options for the effects processors:
• Assign to any insert send/return.
• Assign to any pool, in or out.
• Assign FX out to aux return.
• Assign FX in to aux send (post-fade).
• Assign FX out to bus direct in.
• Assign FX in to channel direct out.
Every XL8 comes supplied with a KT DN9331 RAPIDE motorised fader GEQ controller.
This unit provides rapid adjustments of the graphics with real hardware, and not a
mouse and screen. The graphic channel is selected either by the control centre's SOLO
button (solo tracking system (STS)) or by buttons on the RAPIDE itself.
XL8 Control Centre
Operator Manual
19