Routing An Aux To An Effect Or Output; To Route An Aux - Midas XL8 Operator's Manual

Routing an aux to an effect or output

Routing an aux to an effect or output

To route an aux

1
Select an aux to the mix bay; see "To select an output channel" on page 184.
2
Select the bus mode section by pressing the quick access button adjacent to the direct input section of the
output channel strip.
3
Click on the down arrow to the right of the aux output source field (adjacent to XLR socket) to obtain a
drop-down list containing output source names.
4
Click on the name of the output source you require, for example, the effect you have just set up in "Setting
up the effects rack" on page 188.
XL8 Control Centre
Operator Manual
2
189
3