Table of Contents
Advertisement
Diagnostics
Diagnostic screen description
1
2
6
10
1
DSPs 1 - 10: shows the unit and connection
status of the DSP units.
2
Mic Splitter 1 - 4: shows the unit and
connection status of the mic splitters.
3
Surface 1 - 5: shows the hardware and
connection status of each bay's control surface.
4
GUI 1 - 5: shows the hardware and connection
status of each bay's GUI screen.
5
M/C 1 and 2: shows the hardware and
connection status of the two master controllers.
6
LINE I/O 1 - 4: shows the unit and connection
status of the I/O units.
7
HMac 1 and 2: shows the status of the snake
connections (X and Y, respectively) between control
centre and router.
XL8 Control Centre
Operator ManualQuick Reference Guide
9
11
12
6
8
FOH X: status of the control centre's internal
8-port X router. (FOH Y is the Y equivalent.)
9
Stage X: status of the 20-port external X router
on the stage. (Stage Y is the Y equivalent.)
10
Deploy button for configuring new DSP units, for
example, when you have just received a replacement
unit. Pressing this button loads the networked DSP
units with default software.
11
Swap button for swapping the active network
over from X to Y.
12
Message for showing you which master controller
is currently active; master controller 1 in this
example.
267
3
4
5
7
8
Advertisement
Table of Contents
