Monitor A And B Output Panel And Meters - Midas XL8 Operator's Manual

116

monitor a and b output panel and meters

This is the monitor output panel. The controls in this area do not have GUI support and
are unaffected by automation. There are two monitor paths, A and B, that are virtually
identical in operation except that monitor a has a fader for level control (monitor b
has a control knob) and switch for swapping the control output of the headphones to
fader. These control the output levels in their respective sections.
monitor a and monitor b meters monitor the peak signal levels of stereo left and right
for both monitor paths. The metering capabilities of both monitors is the same.
8
7
5
4
1
1
Control knob for monitor b signal adjustment from +10
to -∞.
2
MUTE switch (monitor a and b sections) for muting the
3
headphones.
3
Control knob (monitor a and b sections) for adjusting
headphone level. Ranges from +10 to -∞.
2
4
Left and right monitor output MUTE switches (monitor
a and b sections).
5
DIM switches (monitor a and b sections) for dimming
6
output level by 20dB.
6
C/O fader switch for switching control output of
headphones to fader on monitor a section. Integral LED for
switch on/off indication, where on = fader control and off =
no fader control.
7
Non-automated fader for control of output level from
+10 to -∞ on monitor a section.
8
Stereo left and right peak level meters for monitor a
and b sections.
Chapter 6: Output Bay
8
XL8 Control Surface
Operator Manual