Fader, Routing And Meter - Midas VeniceU16 Operator's Manual

Fader, routing and meter

Fader, routing and meter
The VeniceU is a flexible mixing console with four group buses, plus stereo and mono,
with a 100 mm fader and a four-LED signal meter per mono input channel.
Fader section of the mono input channels
Item
1
2
3
4
5
VeniceU
Operator Manual
Description
LED meter These four LEDs comprise the input channel meter, which lets
you monitor the input signal without having to use the PFL.
Fader This channel fader allows for continuous adjustment of the channel
level from 4 (infinity/off) to +10dB. At 0dB the output of the channel to the
stereo, mono and group buses will be at unity, that is, no adjustment in
level from the input.
Group switches Two latching switches route the channel to group 1 or 2,
or group 3 or 4. See "Routing" on page 46.
mono switch This switch routes the channel signal to the mono bus
(post-EQ, pre-pan, post-mute and post-fader).
stereo switch This switch routes the channel signal to the stereo master
bus (post-EQ, post-pan, post-mute and post-fader).
45
1
2
3
4
5