To Set Up The Rapide - Midas XL8 Operator's Manual

234

To set up the RapidE

1
On the RapidE unit, enter the set up menu by pressing
and holding down the HOME (SETUP) button.
2
Press HOME (SETUP) three times to access the "Press
Rapide CHANNEL ..." display.
3
On the RapidE, choose the channel (bank and channel
number) that you wish to allocate to one of the GEQ
units. If necessary, press the required bank button, for
example, "A". Then press the required channel button,
for example, "1".
Notes:
Bank and channel buttons illuminate to show active
selection. If a channel button is selected that is already
allocated to a HELIX unit, it will flash.
4
Turn left control knob to select "CONSOLE" mode.
Chapter 11: Graphic Equaliser (GEQ)
1
x3
2
3a 3b
4
XL8 Control Centre
Operator Manual