Vca Faders - Midas XL8 Operator's Manual

VCA faders

VCA faders
5
4
XL8 Control Centre
Operator Manual
2
1
1
fader safe LED illuminates if the VCA control
group fader has been removed from scene recall.
2
Solo routing section activates solo routing and
selects which monitor section (A or B) signals are routed
to.
3
vca control group fader adds its level control on
top of the local channel fader controls that it is assigned
to.
4
SOLO button activates signal routing from all
assigned channels to the Monitor "A" section of the
3 console. It is used to monitor VCA master faders by
creating a mix on solo buses, which consists of all input
channels and audio mix groups that are assigned to
control from corresponding VCA masters.
5
AREA B button changes input channel selection
from default (area "A") to those input channels set to
area "B" mode, in bays configured to present input
channels to the user.
91