To Select An Output Channel - Midas XL8 Operator's Manual

184

To select an output channel

There are a number of ways to select an output channel, for example, you can:
a) Press the channel select button in the appropriate fast strip. Where the channel
select button controls two channels, the initial press selects the fast strip's left
channel (shown at top of button) and a second press selects the right channel
(bottom of button). Pressing a channel select button in another fast strip
changes selection to the left channel in that strip and deselect the current one.
b) Scroll by one output channel at a time. You can scroll across all of the banks of
output channels, which have the following type order: returns; auxes; masters
(stereo left and right, and mono); and matrixes.
c) Press the appropriate select quick access button (left or right) within the
appropriate fast strip, which also selects that channel section to the mix bay GUI
detail area. With two channels per fast strip, the left-hand button selects the
lower numbered (odd) channel and the right-hand button selects the higher
numbered (even) channel.
c)
a)
1
b)
Chapter 9: Basic Operation
First press selects
aux 1
2
Scrolls left by one
channel
Scrolls right by
one channel
Only one of these LEDs will be
highlighted to show which bank
is currently selected to the
Second press
selects aux 2
control surface
XL8 Control Centre
Operator Manual