Table of Contents
Advertisement
132
Group management
The management half of the group screens contains five panels of channels/mixes from
which group members are chosen. All of the panels do not necessarily appear, as this is
dependent on group type. The panel on the right is the group member list (the
example below shows a VCA group). Members are selected/deselected using the ADD
and REMOVE buttons in between the panels.
1
Panels of source lists containing inputs, returns,
auxes, matrices and masters from which to add
members to the selected group.
Some may be blanked out, as they dependent on
group type. Use the sliders on the right-hand side of
the panel, where appropriate, to access non-members
that are not currently in view.
2
Name of selected group.
Chapter 7: GUI Menu Options
4
1
3
Group member panel shows the current group
members.
4
ADD button moves the selected non-members in
the source lists to the group member panel; these
now become group members.
5
REMOVE button moves group members from the
group member panel back to their respective source
list. These are now no longer members of the group.
5
2
3
XL8 Control Centre
Operator Manual
Advertisement
Table of Contents
