Table of Contents
Advertisement
230
Technical specifications
Performance
Frequency response
EQ out
EQ in (flat)
Distortion (THD+N)
Dynamic range
Overload indicator
Gain
Equalisation
31 Bands
Centre Frequencies
Tolerance
Maximum Boost/Cut
High Pass Filter Slope
Low Pass Filter Slope
Notch filter
Frequency centres
The following are the standard ISO frequencies to BS EN ISO 266:1997 Frequency
Centres:
25Hz, 31.5Hz, 40Hz, 50Hz, 63Hz, 80Hz, 100Hz, 125Hz, 160Hz, 200Hz, 250Hz, 315Hz,
400Hz, 500Hz, 630Hz, 800Hz, 1.00kHz, 1.25kHz, 1.60kHz, 2.00kHz, 2.50kHz, 3.15kHz,
4.00kHz, 5.00kHz, 6.30kHz, 8.00kHz, 10.0kHz, 12.5kHz, 16.0kHz, 20.0kHz
Due to a policy of continual improvement, the Klark Teknik Group reserves the right to
alter the function or specification at any time without notice.
Chapter 11: Graphic Equaliser (GEQ)
±0.5dBu, 20Hz-20kHz relative to signal at 1kHz
±0.5dBu
< 0.003% @ 1kHz, +4dBu
>112dB (20Hz-20kHz unweighted), ±12dB range
+20dBu
- infinity to +6dBu
To BS EN ISO 266:1997 25Hz-20kHz, 1/3 octave
±5%
±12dB, ±6dB
12 dB/octave
12 dB/octave
Attenuation >18dB, Q=32
XL8 Control Centre
Operator Manual
Advertisement
Table of Contents
