Oracle Acme Packet 4600 Hardware Installation And Maintenance Manual page 37

Initial State Displays
Out-Of-Service State
Displays
Becoming Standby
State Displays
Standby State
Displays
Active State Displays
Acme Packet 4600 Hardware Installation and Maintenance Guide
The graphic display on a Acme Packet 4600 in an HA node indicates the current HA
state. Five state indications can be displayed on the graphic display. Only the
Standby and Active state indications appear in the graphic display for more than a
few seconds. An explanation and example of each HA state follows.
The following example shows the output in the graphic display window of a Acme
Packet 4600 in the initial state:
NET - NET
SESSION DIRECTOR (I)
The following example shows the output in the graphic display window of an out-
of-service Acme Packet 4600:
NET - NET
SESSION DIRECTOR (O/S)
The following example shows the output in the graphic display window of a
becoming standby Acme Packet 4600:
NET - NET
SESSION DIRECTOR (B/S)
The following example shows the output in the graphic display window of a standby
Acme Packet 4600:
NET - NET
SESSION DIRECTOR (S)
Acme Packet 4600 Systems in the active state use the default graphic display. The
following example shows the display of an active Acme Packet 4600:
NET - NET
SESSION DIRECTOR
37