External Storage Device - Keysight CX3300 Series User Manual

External Storage Device

The following interfaces are available for connecting external storage devices.
Table 2-1
USB 3.0 is required for recording the waveform data at maximum sampling rate.
USB 3.0 which supports UASP (USB Attached SCSI Protocol) is preferred. UASP
device driver is pre-installed on the instrument with Windows 10. If your CX3300
is installed with Windows 7, upgrade it to use UASP device driver. Upgrade kit
CX3322AU-W10 or CX3324AU-W10 is required. Contact Keysight Technologies.
Keysight CX3300 User's Guide, Edition 4
Interface of External Storage Devices
Interface
USB 2.0 (High-Speed)
USB 3.0 (SuperSpeed)
Gigabit Ethernet
Maximum Transfer Rate
480 Mbit/s
5 Gbit/s
1 Gbit/s
Using the CX3300
Using Data Logger Mode
Maximum Raw Throughput
500 MBytes/s
71