Connecting the CX1100
The CX1100 other than the CX1152A can be connected to the analog input
channels on the CX3300 front panel.
1. Attach the connector of the CX1100 to the desired channel.
2. Fasten the screws on the connector to assure the contact.
3. If a sensor head has not been connected to the CX1101A/CX1102A/CX1104A
Figure 1-3
CAU T IO N
Confirm the maximum input rating of the CX1100 and the sensor head. Do not
apply any electrical potential and/or current over the value.
NOT E
Connecting the CX1102A Current Sensor to the CX3324A
Connect the Primary and Secondary connectors to the contiguous channels
1 and 2, 2 and 3, or 3 and 4. Both connectors must be connected properly.
Keysight CX3300 User's Guide, Edition 4
current sensor yet, attach or connect it to the current sensor.
CX1100 Connection
CX1100
Sensor head
Device under test
Setting Up the CX3300
Installation
Analog input channels
21