Keysight CX3300 Series User Manual page 46

Using the CX3300
Power On Screen
Waveform tray Displays the icons for the waveforms on the graph. If no waveform is displayed
and Trash bin
on the graph, the icon and the trash bin are not displayed. There is the following
types of waveform.
•
•
•
•
•
Changing the order of icons changes the drawing order of waveforms. Left is
faster. Drag and drop operation allows you to change the order.
Dropping the icon into the trash bin deletes the waveform from the graph.
Dropping the C- or D-icon into the trash bin sets the channel status to OFF and
deletes the waveform from the graph.
Clicking the C-icon selects the channel effective for vertical control and graph
scaling.
Position Waveform expresses all of the memory data. Square surrounds the data
ind icator
displayed on the graph. Moving the square changes data on the graph. Only for
the Scope mode.
Timebase Orange vertical line indicates the timebase position (0 second position). Only for
position
the Scope mode.
Switches the function; Move or Zoom. Image of the icon changes and shows the
function effective now. The left image of this paragraph indicates that the move
function is effective.
Undo. Cancels the last move/zoom operation.
Redo. Cancels the last Undo.
Waveforms. Shows/hides the menu used for selecting the display layout; single,
dual, or zoom display. Image of the icon changes and shows the present layout.
The left image of this paragraph indicates that the display layout is the single.
46
C: Waveform acquired by an analog input channel
D: Waveform acquired by a digital channel
F: Waveform given by a calculation
W: Waveform saved in a waveform memory
P: Waveform database saved in the storage device. Only for the Data Logger
mode.
Keysight CX3300 User's Guide, Edition 4