Using Quick Actions; Controlling Digital Channels - Keysight CX3300 Series User Manual

Using the CX3300
Making a Measurement and Using Useful Tools
The Amplitude data view shows the latest value (Latest), the mean value (Mean),
the maximum value (Max), the minimum value (Min), the Max-Min value (Range),
the standard deviation (Std Dev.), the data count (Count), and the X and Y
minimum and maximum values (X Start, X Stop, Y Min, and Y Max) of the data
used for calculation.
NOT E
You can also use the Analysis dialog box (Analysis > Methods) to use the analysis
tools. The dialog box is opened by clicking the Analysis icon on the sidebar.

Using Quick Actions

The CX3300 supports the following quick actions. One of these quick actions can
be performed by pressing the
•
•
•
•
•
The action taken when the
selected in the Configuration dialog box (Configuration > Multipurpose) opened
by pressing the
Horizontal control on the front panel.

Controlling Digital Channels

The digital channels are available for the CX3324A. Connect the CX1152A Digital
Channel to the Digital D7-D0 connector on the CX3324A rear panel.
To start controlling the digital channels, use the Digital Channel summary on the
summary bar which is located at the bottom of the screen. The summary shows a
pulse symbol which indicates the graph scale small, medium, or large if a digital
channel has been enabled. If no digital channel has been enabled, the summary
shows the character "D" only.
66
Auto Save  starts or stops the automatic data save
QuickSave  saves the specified data to a file
QuickScreen  saves the screen image to a file
QuickSetup  loads a setup file
QuickExecute  runs an executable file
key several times. The
Menu
Summary bar
key. Initially, QuickSave is set.
Multi Purpose
key is pressed depends on the feature
Multi Purpose
Menu
Digital Channel summary
Keysight CX3300 User's Guide, Edition 4
key is located above the