Forcing A Default Setup; Ssd Recovery - Keysight CX3300 Series User Manual

Using the CX3300

Forcing a Default Setup

Forcing a Default Setup

If your CX3300 is not working properly when you start it up, follow these steps to
perform a default setup and return the CX3300 to normal operation.
1. Press the
2. If the CX3300 is still not working properly:
3. If the CX3300 is still not working properly, turn it off.
4. Turn the CX3300 back on. If it does not successfully restart, try recycling the
5. If the CX3300 still does not successfully restart, follow the instructions for

SSD Recovery

Follow these steps to recover your CX3300 solid state drive.
1. Turn off the CX3300.
2. Connect the keyboard to a USB host port of the CX3300.
3. Connect the mouse to a USB host port of the CX3300.
4. Press the Standby switch on the CX3300 front panel.
5. On the Windows boot selection screen, select "Instrument Image Recovery
6. Follows the on-line instruction to proceed the recovery.
82
Default Setup
a. Press the key several times to open the Configuration dialog box. The
Menu
key is located above the Horizontal control on the front panel.
Menu
b. Click Setups to display the Configuration > Setups screen.
c. Click the Factory Defaults button to return the CX3300 to the default
settings it had when it left the factory.
power again.
recovering the SSD.
System".
key.
Keysight CX3300 User's Guide, Edition 4