Power On Screen; Main Waveform - Keysight CX3300 Series User Manual

Power On Screen

Just after the CX3300 boots up, the CX3300 will display as shown below.

Main Waveform

The following graphical user interfaces are available on the Main Waveform.
Graph area
Displays waveforms, markers, annotations, etc.
Horizontal scale
Primary scale area is below the graph area.
Secondary scale area can be above the graph area.
Vertical scale
Primary scale area is on the right side of the graph area.
Secondary scale area can be on the left side of the graph area.
Mode tab
Switches the operation mode: Scope or Data Logger.
Run control
Run, Stop, and Single icons. Controls waveform acquisition. Same as the
Stop
Keysight CX3300 User's Guide, Edition 4
Mode tab
Run control
Trash bin
Waveform tray
Tool Palette
, and keys.
Single
Menu Bar
Position indicator
Timebase position
Main Waveform
Status Bar
Summary Bar
Using the CX3300

Power On Screen

Indicator Tray
,
Run
45