Keysight CX3300 Series User Manual page 40

Using the CX3300
Front Panel Overview
3. Analog input channels
CAU T IO N
Confirm the maximum rating of the accessories. Do not apply any electrical
potential and/or current over the value.
4. Three USB 2.0 host ports
5. Touch Panel switch
6. Vertical control
7. Trigger control
8. Horizontal control
9. Run Control
10. Navigation keys (up, down, left, right, and enter)
40
The CX3322A has two channels and the CX3324A has four channels.
Connects the CX1100 other than the CX1152A. See
on page 21. Also refer to CX1100 User's Guide for the CX3300 accessories.
Used to connect USB devices such as keyboard, mouse, and USB memory.
To remove USB devices from the instrument, use "Safely Remove Hardware"
on Windows taskbar. If it is not used, the instrument may cause the internal
USB communication error. If the error occurs, turn the instrument off and
disconnect the power cord from it. Leave it about 30 seconds before
rebooting it, and connect the power cord again, and then turn the instrument
on.
Works when the CX3300 application is running. Enables or disables the
touch screen operation. The green LED lights when the touch screen is
enabled.
Controls analog input channel and graph scale. See
Settings" on page 54.
Controls trigger condition. See
Controls timebase and graph scale. See
Timebase Position" on page
Controls measurement execution. See
Acquisitions" on page
"Setting Up Triggers" on page
"Adjusting the Horizontal Scale and
52.
"Starting and Stopping Waveform
51.
Keysight CX3300 User's Guide, Edition 4
"Connecting the CX1100"
"Adjusting the Vertical
57.