Adjusting The Vertical Settings - Keysight CX3300 Series User Manual

Using the CX3300

Adjusting the Vertical Settings

Adjusting the Vertical Settings

Use the Vertical control to set the vertical scale (amperes per division or volts
per division) and the vertical offset and to magnify the waveform.
To adjust the vertical scale and the vertical offset, use the vertical control knobs
or the Setting dialog box (Setting > Channels > Channel N, where N is 1, 2, 3, or
4). This dialog box is opened by clicking the Setting icon on the sidebar or
pressing the
To change
To enable or disable the analog input channel, press the # key (#: 1, 2, 3, or 4)
channel status
associated with the channel.
Pressing the # key changes the channel status as shown below.
Graph displays the waveforms for the channels in the ON status.
Vertical control and graph scaling are effective only for the channel indicated by
the LED which lights (ON).
54
key located above the Horizontal control on the front panel.
Menu
Analog input channel 1
Analog input channel 2
Analog input channel 3
Analog input channel 4
other # key
#
OFF OFF
LED
# key
#
# key other # key
ON ON
Keysight CX3300 User's Guide, Edition 4
Scale
Zoom
Position (offset)
# key
#
other # key
ON OFF