Bench Installation - Keysight CX3300 Series User Manual

Bench Installation

Position the CX3300 where it will have sufficient clearance for airflow around the
back and sides. Fan cools the instrument by drawing air through the sides and
exhausting it out the back.
Do not block the air intake at the sides and the exhaust at the rear of the CX3300.
Minimum clearances for bench operation are 25 mm along the sides and 75 mm
along the back.
For easier display viewing and measurement terminal access, you can tilt up the
front of the CX3300. Flip down tabs behind the front feet.
Figure 1-1
Keysight CX3300 User's Guide, Edition 4
Tilting up the Front of the CX3300
Setting Up the CX3300
Installation
17