Safety Summary - Keysight CX3300 Series User Manual

Safety Information

Safety Summary

Safety Summary

The following general safety precautions must be observed during all phases of
operation, service, and repair of this instrument. Failure to comply with these
precautions or with specific warnings elsewhere in this manual may impair the
protections provided by the instrument. In addition, it violates safety standards
of design, manufacture, and intended use of the instrument. Keysight
Technologies assumes no liability for the customer's failure to comply with these
requirements.
Product manuals may be provided on CD-ROM or in printed form. Printed
manuals are an option for many products. Manuals may also be available on the
Web. Go to
Search field at the top of the page.
NOT E
Do not use this instrument in any manner not specified by the manufacturer. The
protective features of this instrument may be impaired if it is used in a manner
not specified in the operation instructions.
This instrument is an INDOOR USE product.
This instrument complies with INSTALLATION CATEGORY II for mains input and
INSTALLATION CATEGORY I for measurement input terminals, and POLLUTION
DEGREE 2 defined in IEC 61010-1.
If an instrument is marked CAT I (IEC Measurement Category I), or it is not
marked with a measurement category, its measurement terminals must not be
connected to line-voltage mains.
Safety of any system incorporating the equipment is the responsibility of the
assembler of the system.
102
www.keysight.com and type in the product model number in the
Keysight CX3300 User's Guide, Edition 4