Qs Flow - Siemens SITRANS LUT400 Operating Instructions Manual

Maximum Volume
The maximum volume of the vessel. Enter the vessel volume corresponding to the High
Calibration Point. For example, if your maximum vessel volume is 8000 L, enter a value of
8000.
Value
End of QS Volume Wizard
For QS to be successful, all changes must be applied.
Options
To transfer Quick Start values to the device and return to Program menu, press DOWN
arrow
6.3.1.3

QS Flow

Use this wizard to configure simple flow applications.
(Visible on LUT430 (Pump and Flow), and LUT440 (OCM) configured models only.
1. Press RIGHT arrow
MENU.
2. Press RIGHT arrow
3. Press RIGHT arrow
4. At each step, press DOWN arrow
next item, or RIGHT arrow
SITRANS LUT400
Operating Instructions, 07/2019, A5E33329501-AC
Range: 0.0 to 9999999
Default: 100.0
BACK, CANCEL, FINISH
(Display returns to 1.1 Quick Start menu when Quick Start is successfully completed or
cancelled. If CANCEL is selected, no changes are written to the device.)
(Finish). Then press LEFT arrow
to activate PROGRAM mode and open menu level 1: MAIN
two times to navigate to menu item 1.1.1.
to open QS Flow.
three times to return to Measurement mode.
to accept default values and move directly to the
to open Edit mode: the current selection is highlighted.
Commissioning
6.3 Quick Start Wizards
67