Alarms; Set The Common Parameters - Siemens SITRANS LUT400 Operating Instructions Manual

7.6

Alarms

7.6.1

Set the common parameters

①
②
④
⑤
⑥
⑦
Prerequisite: You must know the details of your application and substitute the values for the
sample values provided. If you are bench testing the device, then set your test values to be
the same as the sample values.
Parameter
Sensor Mode (2.1.2.) (Page 168)
or
Sensor Mode (2.1.3.) (Page 169)
Response Rate in Quick Start (Page 59)
Transducer (2.1.6.) (Page 170)
Units (2.1.1.) (Page 168)
Flowrate Units (2.15.3.7.) (Page 233)
Low Calibration Point (2.2.1.) (Page 171)
High Calibration Point (2.2.2.) (Page 172)
Note
When configuring alarms, more than one alarm can be assigned to the same relay.
SITRANS LUT400
Operating Instructions, 07/2019, A5E33329501-AC
Low level value
Material level reading
High level value
Level
Sensor reference point
High calibration point
Description
LEVEL
FLOW
MEDIUM
XPS-10
M
L/S
1.8
0.4
General Operation
7.6 Alarms
99