Commissioning; Local Commissioning - Siemens SITRANS LUT400 Operating Instructions Manual

Commissioning

6.1

Local Commissioning

Local Commissioning
SITRANS LUT400 is an easy to use, and quick to commission device, with its numerous
wizards, and menu driven parameters. The parameters can be modified locally using the
LCD and the local push buttons, also known as the Local User Interface (LUI).
①
A Quick Start Wizard provides an easy step-by-step procedure to help you configure the
device for a simple application. We recommend that you configure your application in the
following order:
● First, run the appropriate Quick Start Wizard for your application (Level, Volume, Flow).
● Next, set up pumps via the Pump Control Wizard (if applicable).
● Lastly, configure alarms, or other controls, totalizers and samplers, referencing the
respective parameters [see Parameter reference (LUI) (Page 167)]. It is important that
alarms, and other controls are configured last to avoid pump relay assignments being
overridden by the Quick Start Wizard.
There are two ways to access the Quick Start wizards:
● Locally (see Quick Start Wizards via LUI (Page 58))
● From a remote location (see Other Quick Start Wizards (QSW) (Page 57)).
See Level Application Example (Page 79), or Flow application example (Page 80) example
for illustrations, and for the complete range of parameters, see Parameter reference (LUI)
(Page 167).
50
Local push buttons
Operating Instructions, 07/2019, A5E33329501-AC
6
SITRANS LUT400