Siemens SITRANS LUT400 Operating Instructions Manual page 193

Peak 3 End Time (2.7.2.2.8.)
Sets the end time of the high energy cost period 3.
Values
Used in conjunction with Peak 3 Start Time (2.7.2.2.7.) (Page 190) to define the high cost
period.
Peak 4 Start Time (2.7.2.2.9.)
Sets the start time of the high energy cost period 4.
Values
Used in conjunction with Peak 4 End Time (2.7.2.2.10.) (Page 191) to define the high cost
period.
Peak 4 End Time (2.7.2.2.10.)
Sets the end time of the high energy cost period 4.
Values
Used in conjunction with Peak 4 Start Time (2.7.2.2.9.) (Page 191) to define the high cost
period.
Peak 5 Start Time (2.7.2.2.11.)
Sets the start time of the high energy cost period 5.
Values
Used in conjunction with Peak 5 End Time (2.7.2.2.12.) (Page 192) to define the high cost
period.
SITRANS LUT400
Operating Instructions, 07/2019, A5E33329501-AC
Range: 00:00 to 23:59
Format: HH:MM (24 hour format, for example: for 5:30pm, set parameter to 17:30)
Default: 00:00
Range: 00:00 to 23:59
Format: HH:MM (24 hour format, for example: for 5:30pm, set parameter to 17:30)
Default: 00:00
Range: 00:00 to 23:59
Format: HH:MM (24 hour format, for example: for 5:30pm, set parameter to 17:30)
Default: 00:00
Range: 00:00 to 23:59
Format: HH:MM (24 hour format, for example: for 5:30pm, set parameter to 17:30)
Default: 00:00
191