Siemens SITRANS LUT400 Operating Instructions Manual page 74

Commissioning
6.3 Quick Start Wizards
PMD Dimensions
Note
• For each PMD excluding Exponential Devices, and Other, you must enter up to four
dimensions.
• In the wizard, you will be prompted for each dimension required for the PMD selected,
and the respective PMD dimension name will be displayed.
PMD selected
Rectangular Flume BS-3680
Round Nose Horizontal Crest Weir BS-3680
Trapezoidal Flume BS-3680
U-Flume BS-3680
Finite Crest Weir BS-3680
Thin Plate Rectangular Weir BS-3680
Rectangular Weir Contracted
Round Pipe
Palmer Bowlus Flume
H-Flume
72
Wizard dimension name (parameter menu reference)
APPROACH WIDTH B
THROAT WIDTH B
HUMP HEIGHT P
THROAT LENGTH L
CREST WIDTH B
CREST HEIGHT P
CREST LENGTH L
APPROACH WIDTH B
THROAT WIDTH B
HUMP HEIGHT P
THROAT LENGTH L
APPROACH DIAMETER DA
THROAT DIAMETER D
HUMP HEIGHT P
THROAT LENGTH L
CREST WIDTH B
CREST HEIGHT P
CREST LENGTH L
APPROACH WIDTH B
CREST WIDTH B
CREST HEIGHT P
CREST WIDTH B
PIPE INSIDE DIAMETER D
MAXIMUM FLUME WIDTH HMAX
MAXIMUM LISTED HEAD HMAX
Operating Instructions, 07/2019, A5E33329501-AC
SITRANS LUT400