Table of Contents
Advertisement
Description
Setting
Effect
Description
Setting
Effect
Description
Setting
Effect
Siemens Building Technologies
HVAC Products
4.15 Reduction heat pump flow temperature
sensor B21
If not used, heat pump flow temperature sensor B21 must be hidden (deactivated).
Setting range
0...1
The settings have the following meaning:
0
The heat pump flow temperature sensor at B21 is deactivated.
This means that the relevant sensor terminal becomes available for other use.
1
The heat pump flow temperature sensor at B21 is activated.
4.16 Reduction heat pump return temperature
sensor B71
If not used, heat pump return temperature sensor B71 must be hidden (deactivated).
Setting range
0...1
The settings have the following meaning:
0
The heat pump return temperature sensor at B71 is deactivated.
This means that the relevant sensor terminal becomes available for other use.
1
The heat pump return temperature sensor at B71 is activated.
4.17 Reduction water / brine temperature sensor
B11
If not used, water / brine temperature sensor B11 must be hidden (deactivated).
Setting range
0...1
The settings have the following meaning:
0
The water / brine temperature sensor at B11 is deactivated.
This means that the relevant sensor terminal becomes available for other use.
1
The water / brine temperature sensor at B11 is activated.
Basic Documentation RVP540 / RVP550
Description of the heating engineer settings
Unit
Factory setting
–
0
Unit
Factory setting
–
0
Unit
Factory setting
–
0
89/348
CE1P2488en
18.10.2002
Advertisement
Table of Contents
