General Fault Codes - Siemens SITRANS LUT400 Operating Instructions Manual

LUI Icon
Lowest priority number equals highest fault severity.
1)
11.3

General Fault Codes

Note
• If two faults are present at the same time, the device status indicator and text for the
highest priority fault will display.
• Certain faults exist, such as with a loss of echo (LOE) or a broken cable, that when
triggered cause the mA output to go to a fail-safe reading (see Fail-Safe (2.4.)
(Page 175)) and LUI to display dashes (– – – – – – –) until fault is cleared. These faults
are indicated with an asterisk (*) in the table below.
SITRANS LUT400
Operating Instructions, 07/2019, A5E33329501-AC
PDM Icon Priority Level Meaning
1
Write access enabled
•
Write access disabled
•
269