Siemens SITRANS LUT400 Operating Instructions Manual page 188

Option available only on LUT430, LUT440.
1)
Each algorithm defines a pump duty and pump start method.
ON Setpoint Pump 1 (2.7.1.6.)
The level at which Pump 1 turns ON, defined in Units (2.1.1.) (Page 168).
Values
This parameter is set according to level even when another reading, such as volume, is
shown on the LCD.
OFF Setpoint Pump 1 (2.7.1.7.)
The level at which Pump 1 turns OFF, defined in Units (2.1.1.) (Page 168).
Values
This parameter is set according to level even when another reading, such as volume, is
shown on the LCD.
ON Setpoint Pump 2 (2.7.1.8.)
The level at which Pump 2 turns ON, defined in Units (2.1.1.) (Page 168).
Values
This parameter is set according to level even when another reading, such as volume, is
shown on the LCD.
OFF Setpoint Pump 2 (2.7.1.9.)
The level at which Pump 2 turns OFF, defined in Units (2.1.1.) (Page 168).
Values
This parameter is set according to level even when another reading, such as volume, is
shown on the LCD.
186
Range: 0.000 to 99999.000
Default: 0.000
Range: 0.000 to 99999.000
Default: 0.000
Range: 0.000 to 99999.000
Default: 0.000
Range: 0.000 to 99999.000
Default: 0.000
Operating Instructions, 07/2019, A5E33329501-AC
SITRANS LUT400