Commissioning
6.3 Quick Start Wizards
Start of QS Level Wizard
Note
The introduction screen is displayed only on the device when using the local push buttons.
This screen is not part of the Quick Start when using SIMATIC PDM.
Shows the type of Wizard to be executed.
Options
Transducer
Specifies the Siemens transducer connected to the device.
Options
Operation
Sets the type of measurement (and the corresponding mA output) required for the
application.
①
②
③
④
⑤
⑥
⑦
60
CANCEL, START
NO TRANSDUCER, XRS-5, XPS-10, XPS-15, XCT-8, XCT-12, XPS-30, XPS-40,
XLT-30, XLT-60, STH
Default: NO TRANSDUCER
Distance
Sensor reference point
High calibration point
Space
Level
Low calibration point
Far range
Operating Instructions, 07/2019, A5E33329501-AC
SITRANS LUT400