Siemens SITRANS LUT400 Operating Instructions Manual page 318

3. MAINTENANCE AND DIAGNOSTICS
316
2.14.3.6 ENDING DAY
2.14.3.7 ENDING MONTH
2.15 FLOW (LUT430, 440 only)
2.15.1 PRIMARY MEASURING DEVICE
2.15.2 AUTO ZERO HEAD
2.15.3 BASIC SETUP
2.15.3.1 METHOD OF FLOW CALCULATION
2.15.3.2 FLOW EXPONENT
2.15.3.3 MAXIMUM HEAD
2.15.3.4 MAXIMUM FLOW AT 20MA
2.15.3.5 ZERO HEAD OFFSET
2.15.3.6 FLOWRATE DECIMAL
2.15.3.7 FLOWRATE UNITS
2.15.3.8 USER DEFINED UNIT
2.15.3.9 LOW FLOW CUTOFF
2.15.4 PMD DIMENSIONS
2.15.4.1 K FACTOR
2.15.4.2 V NOTCH ANGLE
2.15.4.3 SLOPE
2.15.4.4 ROUGHNESS COEFFICIENT
2.15.4.5 OCM DIMENSION 1
2.15.4.6 OCM DIMENSION 2
2.15.4.7 OCM DIMENSION 3
2.15.4.8 OCM DIMENSION 4
2.15.5 UNIVERSAL HEAD VS FLOW
2.15.5.1 TABLE 1-8
2.15.5.2 TABLE 9-16
2.15.5.3 TABLE 17-24
2.15.5.4 TABLE 25-32
2.16 TOTALIZERS (LUT430, 440 only)
2.16.1 DAILY TOTALIZER
2.16.2 RUNNING TOTALIZER
2.16.3 TOTALIZER DECIMAL POSITION
2.16.4 TOTALIZER MULTIPLIER
2.16.5 RESET DAILY TOTALIZER
2.16.6 RESET RUNNING TOTALIZER
3.1 IDENTIFICATION
3.1.1 TAG
3.1.2 LONG TAG
3.1.3 DESCRIPTOR
Operating Instructions, 07/2019, A5E33329501-AC
SITRANS LUT400